PRODUCT OVERVIEW
The IMU080 is a compact 9-axis inertial measurement module designed for motion tracking and attitude sensing applications. It integrates a 3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer, providing reliable orientation and heading data.
With built-in calibration and real-time data output, the IMU080 supports dynamic attitude measurement and is ideal for embedded systems, robotics, and consumer-level applications.
KEY FEATURES
- 9-axis IMU (Gyroscope + Accelerometer + Magnetometer)
- Dynamic attitude and heading measurement
- Real-time calibrated data output
- TTL serial communication (SCI)
- Compact size for embedded integration
- Low power consumption (≤15mA)
- Automatic periodic data transmission
WHY CHOOSE IMU080
✔ Cost-effective solution for motion sensing
✔ Small size ideal for embedded devices
✔ Easy integration with TTL interface
✔ Suitable for large-scale deployment
APPLICATIONS
- Mobile robots and obstacle avoidance
- VR / AR motion tracking
- Smart home devices
- Service robots / vacuum robots
- Industrial automation
- Medical and laboratory equipment
FUNCTION DESCRIPTION
- Dynamic attitude measurement
- Heading (yaw) detection
- Real-time data transmission
- Calibration and attitude output
ATTITUDE PARAMETERS
- Roll Range: ±180°
- Pitch Range: ±90°
- Heading Range: ±180°
- Attitude Accuracy: <0.25° (dynamic)
- Heading Accuracy: <2.5°
OUTPUT & INTERFACE
- Interface: TTL (SCI serial communication)
- Baud Rate: 4800 ~ 115200
- Data Format: 8-bit, no parity, 1 stop bit
- Output Frequency: 1 ~ 100Hz
ELECTRICAL SPECIFICATIONS
- Supply Voltage: 3.3V (3.3~5V supported)
- Working Current: ≤15mA
- Operating Temperature: -10 ~ +50°C
- Storage Temperature: -45 ~ +85°C
MECHANICAL SPECIFICATIONS
- Size: 15.3 × 15.5 × 2.77 mm
- Weight: ≤5g
- Output Type: Pin header / solder pads
PIN DEFINITION
- VCC – Power Input (3.3V)
- GND – Ground
- RXD – Serial Receive
- TXD – Serial Transmit
- NC – Not Connected
PACKAGE INCLUDES
- 1 × IMU080 Sensor Module
NOTES
- Ensure correct voltage input (3.3V recommended)
- Avoid magnetic interference for accurate heading
- Calibration is recommended before use
